Low Input Single Stage Infra-red Heaters for Industrial, Commercial and Residential Applications

How It Works
The LS SERIES low input single stage, infra-red heaters are designed for reduced mounting heights in industrial, commercial and residential applications and offer standard control of a typical heated space.

The dependable RE-VERBER-RAY LS SERIES infra-red tube-type heaters consist of three main components:

The Control Box/Burner - All the electrical components and main burner are found in the control box. A regulated balance of air and gas (with inputs from 25,000 to 50,000 BTU/h) are mixed in the stainless steel burner and fan-forced into a three inch diameter, 16 gauge titanium alloyed aluminized steel combustion tube. Ignition of this mixture is achieved through the use of a reliable globar ignitor, easily monitored from the floor through a conveniently placed sight glass.

The Radiant Emitter Tube - As the radiant emitter tube temperature increases, maximum radiant efficiency is achieved and infra-red rays are emitted. The efficient design of the technologically-advanced burner ensures the ultimate in heat transfer along the entire length for maximum radiant efficiency.

Engineered Reflector Design - Adjustable, polished aluminum, parabolic reflectors are used to direct the invisible infra-red rays downward. As a result, just like the sun, both people and objects absorb the infra-red heat energy and re-radiate the heat to the surrounding area.

Contact the factory-trained distributor in your area or call us direct for a no cost, no obligation heat loss analysis of your particular situation.

Typical Applications
INDUSTRIAL/COMMERCIAL APPLICATIONS
The RE-VERBER-RAY LS Series of natural gas and propane heaters are low input single stage infra-red heaters designed for reduced mounting heights or low input requirements. Typical industrial and commercial building installations may include:

	Lunchrooms	Mezzanine Areas
	Outdoor Patios	Churches
	Showrooms	Kennels
	Parts Counters	Restaurants

RESIDENTIAL APPLICATIONS
Select models of the RE-VERBER-RAY LS SERIES of natural gas and propane heaters are design-certified by the Canadian Standards Association (CSA) for use in residential applications in specific areas that are adjacent or attached to actual living quarters. The LS Series is not to be installed indoors in traditional living areas of a home. All residential heaters must vent the products-of-combustion out-of-doors. Residential installations may include:

	Home Workshops	Swimming Pools
	Outdoor Patios	Residential Garages
	Solariums

RE-VERBER-RAY LS SERIES infra-red tube heaters offer more than superior fuel economy. Through quality construction and operational features that lead the industry, you are assured that the RE-VERBER-RAY system you install today will mean years of dependable, cost-effective heating for both new construction, and for retrofitted installations. RE-VERBER-RAY quality, performance, design and construction are unsurpassed.



· Two safety differential pressure switches complete with indicator lights to monitor air inlet and exhaust.
· Convenient sight glass allows visual inspection of ignitor and burner operation from the floor
· Exclusive "Opti-Thermal" stainless steel positive pressure turbulator baffle.
· Two foot (61 cm) stainless steel flex connector as standard equipment.
· Model lengths of 10, 15, 20 and 30, feet (3.1, 4.6, 6.1 and 9.2 meters).
· Air inlet collar supplied as standard equipment.
· Resin encapsulated solid state ignition system.
· Globar may be changed without tools.
· Enameled control box.
· Reflector end caps supplied as standard equipment.
· Three inch (7.6 cm) overlapping slip-fit tube connectors standard.
· Pre-purge a standard and integral part of the control system.
· Reflector torsion springs provided as standard equipment.
· Inputs of 25, 30, 40 and 50,000 BTU/h
· Bolted clamps supplied for superior clamping at the tube connections.
· LS Series units may be single or dual vented, through a sidewall or roof.
· Optional "U" and "L" configurations to meet virtually any design requirements.
· 16 gauge aluminized steel radiant emitter tube with corrosion-resistant high emissive black coating standard.
· 16 gauge titanium alloy aluminized steel combustion chamber with corrosion-resistant high emissive black coating standard.



[MODEL SPECIFICATIONS]